Pro-Seal Green Elevator pit projects

When you have leaking cracks and joints you will need to step up to Pro-Seal Products concrete joint and cracks negative and positive side repair system. The leaking joint or crack, once properly prepped, will be filled with with Pro-seal DP-36, backer Rod, Oakum saturared with Pro-Seal 34 caulking, and then packed PPW 2 minute material,  into the still leaking joint. Always call Pro-Seal technical, for guide specifications and or contractors specializing in Pro-Seal materials applications. 

Once the elevator pit joint or crack has been properly prepared and packed with the Pro-Seal Negative Side Repair system, the filled space must be sprayed with Pro-Seal DP-36. immediately.  Always call Pro-Seal technical, for guide specifications and or contractors specializing in Pro-Seal materials applications. 

Allow forty-eight hours for the Pro-Seal Products , Pro-Seal Joint and Crack repair materials to cure. Once the Pro-Seal Systems are cured there will be no more leaks in the treated areas, Note that if you repair only the leaking cracks and joints, with Pro-Seal materials,  the water may migrate to other untreated cracks and joints in the space. Always call Pro-Seal technical, for guide specifications and or contractors specializing in Pro-Seal materials applications.

Elevator pits with standing ground water and/or standing hydraulic fluids, are the most complex elevator pit challenges. These pits will require several Pro-Seal systems to stop ingress of water, migration of hydraulic fluid, or both. With Pro-Seal the  creation of a ingress water barrier and a primary containment in one system is achievable .