Anti-Graf

  

Translated to Chinese: Non-Sacrificial polycarbon/polycarbonate anti-graffiti sealer


Pro-Seal Anti-Graf™ is a polycarbon/ polycarbonate integrated polyacryl graffiti and hydrocarbon resistant sealer. Anti-Graf is available in both sacrificial and non-sacrificial formulations.

抗涂是一种聚碳酸.它是能够抵抗烃类和聚丙烯涂鸦的封闭剂。抗涂鸦有牺牲性和非牺牲性两种。


Aqua Crete

  

Translated to Chinese: Liquid Applied Elastomeric Coating


Pro-Seal Aquacrete™ is a polycarbon/ polycarbonate technology integrated polyacryl single component breathable elastomeric coating with exceptional elongation and elasticity for decorative finishes over negative side trowel coats.

Pro-Seal Aquacrete™ 是以综合丙烯醛基的单组分和聚碳酸酯技术而形成的透气的橡胶涂层,对于装饰性修整具有良好的延展率和弹性,并超过了涂抹负面外层。


Aqua Flex

  

Translated to Chinese: Liquid Applied Elastomeric Coating


Pro-Seal Aqua Flex™ is a polycarbon/polycarbonate integrated latex polyacryl single component elastomeric coating with exceptional elongation and elasticity. 

Pro-Seal Aqua Flex™  是一种含有聚碳酸酯和乳胶聚丙烯的单一涂料,具有很好的延展性和弹性。


De-Graf

  

Translated to Chinese: Graffiti Removal Agent


Pro-Seal De-Graf™ is a polycarbon/ polycarbonate technology integrated glycolic alcohol graffiti remover designed to remove most graffiti “tagging” paints with minimal effort.  De-Graf™ performs best, when removing graffiti from surfaces protected with Anti-Graf™ non-sacrificial sealer.

Pro-Seal De-Graf™  是一种综合聚碳酸酯和乙二醇酒精的综合技术来去除涂鸦的去除剂,目的在于用最小的力量去除涂鸦标记。当从有Anti-Graf™保护的表面去除涂鸦时, De-Graf™效果最好且不影响密封。


DP-36

  

Translated to Chinese: Fluid Contaminant Extractant & Deep Penetrating Sealer


Pro-Seal DP-36® is a single component polycarbon/polycarbonate technology integrated reactive osmotic polysilicate reagent that creates a deep negative side seal, densifies, hardens, reduces vapor drive and preserves most concrete substrates when used as part of a Pro-Seal® system.

 

Pro-Seal DP-36® 是一个单一组分,由聚碳酸酯技术综合反应的渗透性聚硅酸盐试剂。它可加深密封,密度,硬度,减少蒸汽的产生并且在使用Pro-Seal® 系统中部分产品时,可保护混凝土表面。


Drycrete

  

Chinese: Bonding and Drying Agent


Pro-Seal DrycreteTM is a polycarbon/ polycarbonate technology integrated alcohol silicate bonding and drying agent for concrete resisting spot drying and hair checking in new concrete and creating preparation for better bonding of paint, sealers and coatings.

 

Pro-Seal DrycreteTM 是以接合酒精硅酸盐的聚碳酸酯纤维技术和干燥剂为核心来抵抗干斑和发状浮力以及更好的接合油漆、密封和涂层。


Flex System I

  

Translated to Chinese: Membrane for Hoizontal Applications


Pro-Seal Flex System I™ is a polycarbon/ polycarbonate technology integrated modified urethane horizontal waterproofing membrane. This product is designed as a flexible monolithic membrane for weatherproofing and waterproofing.

 

Pro-Seal Flex System I™是聚碳/聚碳酸酯技术集成改性聚氨酯横向防水卷材。此产品被设计成一个灵活的耐候性和防水的单片膜。


Flex System II

  

Translated to Chinese: Membrane for Hoizontal Applications


Pro-Seal Flex System II™ is a polycarbon/ polycarbonate technology integrated modified urethane horizontal waterproofing membrane. This product is designed as a flexible monolithic membrane for weatherproofing and waterproofing.

 

Pro-Seal Flex System II™ 聚碳/聚碳酸酯技术集成改性聚氨酯横向防水卷材。此产品被设计成一个灵活的耐候性和防水的单片膜


PD-400

  

Translated to Chinese: Breathable Penetrating Sealer 聚碳酸脂透气滲透性密封劑


Pro-Seal PD-400™ is a single component polycarbon/polycarbonate technology integrated polysilicate Polysilane one-coat penetrating breathable sealer that completely seals most porous substrates.

Pro-Seal PD-400™ 是一种单质聚碳/聚碳酸融入聚硅酸硅酸一道涂可以完全密封大多数的多孔基材


PPWS

  

Translated to Chinese: Quick Setting Grout


Pro-Seal PPWS™ is polycarbon/ polycarbonate technology integrated quick setting grout material for patching and repairing cracks in concrete or mortar. This product has a set time of 10-15 minutes where Pro-Seal PPW™ has a set time of 3-5 minutes.

Pro-Seal PPWS™ 聚碳/聚碳酸集成技术于快速混凝浆,主要用于修补和维修混凝土和砂浆里的裂缝。普通产品的设定时间是10-15钟,Pro-Seal PPWS™只需要3-5钟。


Pro-Cure A

  

Translated to Chinese: Non-Solvent Curing Compound


Pro-Seal Pro-Cure A™ is a polycarbon/

polycarbonate technology integrated silicaholate  single component, non-solvent, film-forming concrete curing agent.

 

Pro-Seal Pro-Cure A™ 是聚碳/聚碳酸酯技术集成silicaholate单组分,无溶剂,成膜混凝土固化剂。

 

This product has been designed to dissipate when exposed to solar light or heat and cure new concrete to its maximum strength.

产品的设计是当接触到太阳能光或热的新混凝土可以固化其最大的力量

 

This product is a Type 1, Class A & B curing compound.

这产品是Type 1, Class A & B 固化复合。


Pro-Seal 34

  

Translated to Chinese: Caulking for Wet or Damp Environments 填补潮湿或瘴气的表面


Pro-Seal 34® is a single component M34 elastoplastic, polycarbon/polycarbonate technology integrated poly acryl sealant material. Pro-Seal 34® stops leaks and seals wet, damp or dry surfaces. Pro-Seal 34® is gunable from 3.3°C to 36.7°C and may be applied to surface temperatures ranging from -56.6°C to +104.4°C.

 

Pro-Seal 34®  是一种融合聚碳酸脂和聚丙烯密封剂的弹性塑料。Pro-Seal 34® 防止渗漏,并为水性和油性的表面提供保护。在摄氏3.336.7度下都可使用,而在负56.6至正104.4摄氏度的表面温度下也许可以使用。


R.O.C. Hard

  

Translated to Chinese: Non-Solvent Surface Hardening & Polishing Agent 磨光及強化表面的非溶劑


Pro-Seal R.O.C. Hard™ is a single component polycarbon/polycarbonate technology integrated silicaholate concrete hardening agent. This product cures and polishes concrete to a high-shine “Rock Hard” finish.

Pro-Seal R.O.C. Hard™ 是一种融合聚碳酸脂集成技术和?的混凝土加强剂。本产品处理及打磨混凝土以制造高光泽「石抛光」。


SP-12

  

Translated to Chinese: Breathable Penetrating Sealer 聚碳酸脂透气滲透性密封劑


Pro-Seal SP-12™ is a single component polycarbon/polycarbonate technology integrated polysilane polysilicate one-coat penetrating breathable sealer that completely seals most porous substrates.

 

Pro-Seal SP-12™是一种融合聚碳酸脂集成技术和 聚硅酸盐硅酸的渗透性密封剂,可完全密封大部分能渗透的底层。


Ultra Shield II-A

  

Translated to Chinese: Polycarbon/Polycarbonate Film Sealer聚碳酸脂胶片密封剂


Pro-Seal Ultra Shield II-A™ is a polycarbon/ polycarbonate technology integrated high density polyacryl hydrocarbon resistant film sealer. This product is available in custom colors. This product is designed to protect the applied surface against inclement environment and weather conditions.

Pro-Seal Ultra Shield II-A™ 是一种融合聚碳酸脂集成技术和聚丙烯烃的胶片密封剂。本产品有多种颜色。本产品为应用表面提供保护,以抵抗恶劣的环境和天气损害。


Weathermaster

  

Translated to Chinese: Polycarbon/Polycarbonate Film Sealer 聚碳 / 聚碳酸脂薄膜密封劑


Pro-Seal Weathermaster™ is a hydrocarbon resistant Polyacryl polycarbon/polycarbonate integrated elastoplastic low density polyacryl technology film sealer. This product is available in custom colors.

 Pro-Seal Weathermaster™ 是一种抗碳氢融合聚碳酸脂集成薄膜密封, 并具有弹塑性特质。本产品可以自定义颜色。


<< Back

 

©Copyright 2014 Proseal
Created and maintained by PROSEAL
This site is optimized for Netscape 4.0  and Internet Explorer 5.0 or higher. Please download an updated version.